Mould Show Room ---DSW---

Path: Home >> HTW600Injection Moulding Machine

Products Speciality

Clamp unit

The clamping unit is quick moving platen, running placidity moving speed over 36m/min.

Moving platen supported on the machine bed by adjustable slipping block that made zinc metal, it open and close quickly and lightly.

End point positioning controlled by high precision transducers.

Tie bars painting hardened Cr can able to bear or endure cauterization and abrasion.

Tie bars with unload slot marches spring nut can be constant of using for long time.

closing and opening speeds independently set, each programmable in 3 stages. It may be alarm automatic at abnormality.

five points holding pressure to clamping processes computer-optimized.
Injection unit

Twin opposed cylinders ensure parallel injection movement.

Screw cylinders suitable for up to A, B, C. The screw may be optional 3 kinds of nitride, painting hardening Cr and double metals.
Hydraulic system

Adjustable backpressure and zero backpressure may be option.

Integrations valve board is response soon and high precision.

Hydraulic system can be able to overload running, sensitive to reasonability, lower pulse and higher stabilization.
Electrical control unit

a) There is 3-manners of manual, semi-auto, automatic in the menu.

b) Controlled several section PID temperatures, monitoring, alarm and diagnosing.

c) The menu of special computer imported has two color: one is black and write, other color.

Technical Parameter

Address: Room1621 Linqiao Piazza, Ningbo City,315010, China

Tel:+86(574) 27861829 27861849 27861830 Fax:+86(574)87264906