行业标准规范英汉对照-工艺装备

1 GB/T 967-1994 螺母丝锥 Nut taps
2 GB/T 968-1994 丝锥螺纹公差 Manufacturing tolerances on the threaded portion of taps
3 GB/T 969-1994 丝锥技术条件 Technical specification for taps
4 GB/T 970.1-1994 圆板牙 型式和尺寸 The types and dimensions for circular screwing dies
5 GB/T 970.2-1994 圆板牙 技术条件 Technical specifications for circular screwing dies
6 GB/T 970.3-1994 圆板牙架型式和互换尺寸 Die stocks--Interchangeability dimensions
7 GB/T 971-1994 滚丝轮 Thread rolling cylindrical dies
8 GB/T 972 -1994 搓丝板 Thread rolling flat dies
9 GB/T 1008-1989 机械加工工艺装备基本术语 General terminology of machining tooling
10 GB/T 1109-1985 短莫氏锥柄立铣刀 End mills with short Morse taper shank
11 GB/T 1115-1985 圆柱形铣刀 Cylindrical cutters
12 GB/T 1117-1985 直齿三面刃铣刀 Side and face milling cutter with straight teeth
13 GB/T 1118-1985 错齿三面刃铣刀 Side and face milling cutters with double alternate helix
14 GB/T 1119-1985 尖齿槽铣刀 Flat relieved tooth slotting cutters
15 GB/T 1124.1-1996 凸凹半圆铣刀 第1部分: 凹半圆铣刀的型式和尺寸 Convex and concave milling cutters--Part 1: The types and dimensions for concave milling cutters
16 GB/T 1124.2-1996 凸凹半圆铣刀 第2部分: 凸半圆铣刀的型式和尺寸 Convex and concave milling cutters--Part 2: The types and dimensions for convex milling cutters
17 GB/T 1124.3-1996 凸凹半圆铣刀 技术条件 Convex and concave milling cutters technical specifications
18 GB/T 1131-1984 手用铰刀 Hand reamers
19 GB/T 1132-1984 直柄机用铰刀 Machine reamers with parallel shanks
20 GB/T 1133-1984 锥柄机用铰刀 Machine reamers with Morse taper shanks
21 GB/T 1134-1984 带刃倾角锥柄机用铰刀 Machine reamers with edge inclination Morse taper shanks
22 GB/T 1135-1984 套式机用铰刀 Shell machine reamers
23 GB/T 1139-1984 直柄莫氏圆锥和公制圆锥铰刀 Morse and metric taper reamers with parallel shanks
24 GB/T 1140-1984 锥柄莫氏圆锥和公制圆锥铰刀 Morse and metric taper reamers with Morse taper shanks
25 GB/T 1141-1984 锥柄扩孔钻 Core drills with Morse taper shanks

26 GB/T 1142-1984 套式扩孔钻 Shell drills
27 GB/T 1143-1984 60°、90°、120°锥柄锥面锪钻 Countersinks with morse taper shanks for angles 60°,90°and 120°inclusive
28 GB/T 1214.1-1996 游标类卡尺 通用技术条件 The specification for callipers of vernier type
29 GB/T 1214.2-1996 游标类卡尺 游标卡尺 The vernier callipers for callipers of vernier type
30 GB/T 1214.3-1996 游标类卡尺 高度游标卡尺 The high gauge for callipers of vernier type
31 GB/T 1214.4-1996 游标类卡尺 深度游标卡尺 The depth gauge for callipers of vernier type
32 GB/T 1216-1985 外径千分尺 Micrometers
33 GB/T 1217-1986 公法线千分尺 Gear tooth micrometers
34 GB/T 1218-1987 深度千分尺 Depth micrometers
35 GB/T 1219-1985 百分表 Dial gauges
36 GB/T 1438.1-1996 锥柄麻花钻 第1部分: 莫氏锥柄麻花钻的型式和尺寸 Taper shank twist drills--Part 1: The types and dimensions for Morse taper shank twist drills
37 GB/T 1438.2-1996 锥柄麻花钻 第2部分: 莫氏锥柄长麻花钻的型式和尺寸 Taper shank twist drills--Part 2: The types and dimensions for long Morse taper shank drills
38 GB/T 1438.3-1996 锥柄麻花钻 第3部分: 莫氏锥柄加长麻花钻的型式和尺寸 Taper shank twist drills--Part 3: The types and dimensions for lengthened morse taper shank twist drills
39 GB/T 1438.4-1996 锥柄麻花钻 第4部分: 莫氏锥柄超长麻花钻的型式和尺寸 Taper shank twist drills--Part 4: The types and dimensions for extra-long Morse taper shank twist drills
40 GB/T 1442-1985 直柄工具用传动扁尾及套筒的尺寸和公差 Driving tenons and sockets for parallel shank tools-- Dimensions and tolerances
41 GB/T 1443-1996 机床和工具柄用自夹圆锥 Machine tools--Self-holding tapers for tool shanks
42 GB/T 1483-1989 螺口式灯头的量规 Gauges of edison screw lamp caps
43 GB/T 1484-1979 插口式灯头的量规 Gauges for bayonet lamp caps
44 GB/T 1581-1979 米制锥螺纹量规 Gauges for tapered screw thread,metric series
45 GB/T 1957-1980 光滑极限量规 Limit gauges for plain workpiece
46 GB/T 2476-1994 普通磨料 代号 Symbols of abrasive materials
47 GB/T 2478-1996 普通磨料 棕刚玉 Conventional abrasive--Brown fused alumina
48 GB/T 2479-1996 普通磨料 白刚玉 Conventional abrasive White fused alumina
49 GB/T 2480-1996 普通磨料 碳化硅 Conventional abrasive Wilicon carbide
50 GB/T 2483-1983 磨料标志和包装规定 Marking and packing
51 GB/T 2484-1994 普通磨具 代号和标记 Symbols and designation for bonded abrasive products
52 GB/T 2487-1984 油石 Oil stones and sticks
53 GB/T 2488-1984 砂瓦 Segments of grinding wheels
54 GB/T 2489-1984 薄片砂轮 Thin grinding wheels
55 GB/T 2492-1984 砂轮静平衡检验方法及不平衡数值 Static balance testing for grinding wheels and unbalance value
56 GB/T 2493-1995 砂轮的回转试验方法 Rotation test of grinding wheel strength
57 GB 2494-1995 磨具安全规则 Safety rules for bonded abrasives
58 GB/T 2495-1996 普通磨具 包装 Packing for bonded abrasive products
59 GB/T 2804-1981 组合夹具元件结构要素 Modular parts of fixture construction--General features, profiles and dimensions
60 GB/T 2851.1-1990 冲模滑动导向模架 对角导柱模架 Sliding guide die sets for press tools—Diagonal pillar sets
61 GB/T 2851.3-1990 冲模滑动导向模架 后侧导柱模架 Sliding guide die sets for press tools—Back pillar sets
62 GB/T 2851.4-1990 冲模滑动导向模架 后侧导柱窄形模架 Sliding guide die sets for press tools—Back pillar sets (narrow)
63 GB/T 2851.5-1990 冲模滑动导向模架 中间导柱模架 Sliding guide die seta for press tools—Center pillar sets
64 GB/T 2851.6-1990 冲模滑动导向模架 中间导柱圆形模架 Sliding guide die sets for press tools—Center pillar sets (round)
65 GB/T 2851.7-1990 冲模滑动导向模架 四导柱模架 Sliding guide die sets for press tools—Four pillar die sets
66 GB/T 2852.1-1990 冲模滚动导向模架 对角导柱模架 Ball slide die sets for press tools—Diagonal pillar sets
67 GB/T 2852.2-1990 冲模滚动导向模架 中间导柱模架 Ball slide die sets for press tools—Center pillar sets

68 GB/T 2852.3-1990 冲模滚动导向模架 四导柱模架 Ball slide die sets for press tools—Four pillar die sets
69 GB/T 2852.4-1990 冲模滚动导向模架 后侧导柱模架 Ball slide die sets for press tools—Back pillar die sets
70 GB/T 2855.1-1990 冲模滑动导向模座 对角导柱上模座 Holder for sliding guide die sets for press tools—Punch holder for diagonal pillar sets
71 GB/T 2855.2-1990 冲模滑动导向模座 对角导柱下模座 Holder for sliding guide die sets for press tools—Die holder for diagonal pillar sets
72 GB/T 2855.5-1990 冲模滑动导向模座 后侧导柱上模座 Holder for sliding guide die sets for press tools—Punch holder for back pillar sets
73 GB/T 2855.6-1990 冲模滑动导向模座 后侧导柱下模座 Holder for ball slide die sets for press tools—Die holder for back pillar sets
74 GB/T 2855.7-1990 冲模滑动导向模座 后侧导柱窄形上模座 Holder for sliding guide die sets for press tools—Punch holder for back pillar sets (narrow)
75 GB/T 2855.8-1990 冲模滑动导向模座 后侧导柱窄形下模座 Holder for sliding guide die sets for press tools—Die holder for back pillar sets (narrow)
76 GB/T 2855.9-1990 冲模滑动导向模座 中间导柱上模座 Holder for sliding guide die sets for press tools—Punch holder for center pillar sets
77 GB/T 2855.10-1990 冲模滑动导向模座 中间导柱下模座 Holder for ball slide die sets for press tools—Die holder for center pillar sets
78 GB/T 2855.11-1990 冲模滑动导向模座 中间导柱圆形上模座 Holder for sliding guide die sets for press tools—Punch holder for center pollar sets (round)
79 GB/T 2855.12-1990 冲模滑动导向模座 中间导柱圆形下模座 Holder for sliding guide die sets for press tools—Die holder for center pillar sets (round)
80 GB/T 2855.13-1990 冲模滑动导向模座 四导柱上模座 Holder for sliding guide die sets for press tools—Punch holder for four pillar sets
81 GB/T 2855.14-1990 冲模滑动导向模座 四导柱下模座 Holder for ball slide die sets for press tools—Die holder for four pillar sets
82 GB/T 2856.1-1990 冲模滚动导向模座 对角导柱上模座 Holder for ball slide die sets for press tools—Punch holder for diagonal pillar sets
83 GB/T 2856.2-1990 冲模滚动导向模座 对角导柱下模座 Holder for ball slide die sets for press tools—Die holder for diagonal pillar sets
84 GB/T 2856.3-1990 冲模滚动导向模座 中间导柱上模座 Holder for ball silde die sets for press tools—Punch holder for center pillar sets
85 GB/T 2856.4-1990 冲模滚动导向模座 中间导柱下模座 Holder for ball slide die sets for press tools—Die holder for center pillar sets
86 GB/T 2856.5-1990 冲模滚动导向模座 四导柱上模座 Holder for ball slide die sets for press tools—Punch holder for four pillar sets
87 GB/T 2856.6-1990 冲模滚动导向模座 四导柱下模座 Holder for ball slide die sets for press tools—Die holder for four pillar sets
88 GB/T 2856.7-1990 冲模滚动导向模座 后侧导柱上模座 Holder for ball silde die sets for press tools—Punch holder for back pillar sets
89 GB/T 2856.8-1990 冲模滚动导向模座 后侧导柱下模座 Holder for ball slide die sets for press tools—Die holder for back pillar sets
90 GB/T 2861.1-1990 冲模导向装置 A型导柱 Guide unit for press tools—Guide pillars, types A
91 GB/T 2861.2-1990 冲模导向装置 B型导柱 Guide unit for press tools—Guide pillars, type B
92 GB/T 2861.3-1990 冲模导向装置 C型导柱 Guide unit for press tools—Guide pillars, type C
93 GB/T 2861.4-1981 冷冲模导向装置 A型小导柱 Guide unit of cold press dies--Small guide pillars, type A
94 GB/T 2861.5-1981 冷冲模导向装置 B型小导柱 Guide unit of cold press dies--Small guide pillars, type B
95 GB/T 2861.6-1990 冲模导向装置 A型导套 Guide unit for press tools—Guide bushes, type A
96 GB/T 2861.7-1990 冲模导向装置 B型导套 Guide unit for press tools—Guide bushes, type B
97 GB/T 2861.8-1990 冲模导向装置 C型导套 Guide unit for press tools—Guide bushes, type C
98 GB/T 2861.9-1981 冷冲模导向装置 小导套 Guide unit of cold press dies--Small guide bushing
99 GB/T 2861.10-1990 冲模导向装置 钢球保持圈 Guide unit for press tools—Cage
100 GB/T 2861.11-1990 冲模导向装置 圆柱螺旋压缩弹簧 Guide unit for press tools—Cylindrical coil compression spring
102 GB/T 2861.13-1990 冲模导向装置 B型可卸导柱 Guide unit fir press tools—Guide pillar with taper lead, type B
103 GB/T 2861.14-1990 冲模导向装置 衬套 Guide unit for press tools—Bushing
104 GB/T 2861.15-1990 冲模导向装置 垫圈 Guide unit for press tools—Washer
105 GB/T 2861.16-1990 冲模导向装置 压板 Guide unit for press tools—Clampr
106 GB/T 2861.17-1981 冷冲模导向装置 可卸导柱模座安装尺寸 Guide unit of cold press dies--Mounting dimension of die holder for removable guide pillars
107 GB/T 2861.18-1981 冷冲模导向装置 压圈固定导柱 Guide unit of cold press dies--Guide pillars with ring fixed
108 GB/T 2861.19-1981 冷冲模导向装置 压圈固定导套 Guide unit of cold press dies--Guide bushing with ring fixed
109 GB/T 2861.20-1981 冷冲模导向装置 压圈 Guide unit of cold press dies--Clamping ring
110 GB/T 3043-1989 棕刚玉 化学分析方法 Chemical analysis methods for brown fused alumina
111 GB/T 3044-1989 白刚玉、铬刚玉 化学分析方法 Chemical analysis methods for white fused alumina and pink fused alumina
112 GB/T 3045-1989 碳化硅 化学分析方法 Chemical analysis methods for silicon carbide
113 GB/T 3227-1988 机动套筒扳手的传动四方 Driving squares for power socket wrenches
114 GB/T 3228-1988 机动套筒扳手的四方传动套筒 Square drive sockets for power socket wrenches
115 GB/T 3229-1988 机动工具的六角传动端 Hexagon drive ends for power tools
116 GB/T 3390.1-1989 手动套筒扳手套筒 Hand operated square drive socket
117 GB/T 3390.2-1989 手动套筒扳手传动方榫和方孔 Driving square for hand operated socket wrenches
118 GB/T 3390.3-1989 手动套筒扳手传动附件 Drivings parts for hand operated square drive socket wrenches
119 GB/T 3390.4-1989 手动套筒扳手连接附件 Conjoining parts for hand operated square drive socket wrenches
120 GB/T 3390.5-1989 手动套筒扳手检验规则、包装与标志 Inspection, packaging and marking for hand operated socket wrenches
121 GB/T 3464.1-1994 机用和手用丝锥 Machine and hand taps
122 GB/T 3464.2-1994 长柄机用丝锥 Long shank machine taps
123 GB/T 3464.3-1994 短柄机用和手用丝锥 Short shank machine and hand taps
124 GB/T 3466-1983 长柄螺母丝锥 Long shank nut taps
125 GB/T 3506-1993 螺旋槽丝锥 Machine taps with helical flutes
126 GB/T 4169.1-1984 塑料注射模具零件 推杆 Components of injection mould for plastics--Ejector pins
127 GB/T 4169.2-1984 塑料注射模具零件 直导套 Components of injection mould for plastics--Straight guide bushes
128 GB/T 4169.3-1984 塑料注射模具零件 带头导套 Components of injection mould for plastics--Guide bushes with head
129 GB/T 4169.4-1984 塑料注射模具零件 带头导柱 Components of injection mould for plastics--Guide pillars with head
130 GB/T 4169.5-1984 塑料注射模具零件 有肩导柱 Components of injection mould for plastics -- Guide pillars with shoulder
131 GB/T 4169.6-1984 塑料注射模具零件 垫块 Components of injection mould for plastics -- Spacer blocks
132 GB/T 4169.7-1984 塑料注射模具零件 推板 Components of injection mould for plastics--Ejector plates
133 GB/T 4169.8-1984 塑料注射模具零件 模板 Components of injection mould for plastics--Mould plates
134 GB/T 4169.9-1984 塑料注射模具零件 限位钉 Components of injection mould for plastics--Stop pins
135 GB/T 4169.10-1984 塑料注射模具零件 支承柱 Components of injection mould for plastics--Support pillars
136 GB/T 4169.11-1984 塑料注射模具零件 圆锥定位件 Components of injection mould for plastics--Locating elements
137 GB/T 4170-1984 塑料注射模具零件技术条件 Components of injection mould for plastics--Specifica-tion
138 GB/T 4211-1984 高速钢车刀条 High speed steel tool bits
139 GB/T 4243-1984 锥柄长刃机用铰刀 Long fluted machine reamers with Morse taper shanks
140 GB/T 4244-1984 带刃倾角直柄机用铰刀 Machine reamers with edge inclination with parallel shanks
141 GB/T 4245-1984 机用铰刀技术条件 Machine reamers--Technical requirements
142 GB/T 4246-1984 铰刀专用公差 Special tolerance for reamers
143 GB/T 4247-1984 锥柄机用桥梁铰刀 Machine bridge reamers with Morse taper shanks
144 GB/T 4248-1984 手用1:50锥度销子铰刀技术条件 Hand taper 1:50 reamers--Technical requirements
145 GB/T 4250-1984 圆锥铰刀技术条件 Taper reamers--Technical requirements

146 GB/T 4251-1984 硬质合金直柄机用铰刀 Machine reamers with parallel shanks with carbide tips
147 GB/T 4252-1984 硬质合金锥柄机用铰刀 Machine reamers with Morse taper shanks with carbide tips
148 GB/T 4253-1984 硬质合金铰刀技术条件 Reamers with carbide tips--Technical requirements
149 GB/T 4255-1984 套式铰刀和套式扩孔钻用心轴 Arbors for shell reamers and shell core drills
150 GB/T 4256-1984 直柄扩孔钻 Core drills with parallel shanks

发表评论:

◎欢迎参与讨论,请在这里发表您的看法、交流您的观点。

控制面板
您好,欢迎到访网站!
  查看权限
网站分类
    标签列表
      文章归档
        友情链接

        Powered By Z-BlogPHP 1.5 Zero

        Copyright Your WebSite.Some Rights Reserved.